{
  "schemaVersion": 1,
  "id": "atlas-lesson-ald-self-limiting-growth",
  "title": "ALD and self-limiting surface reactions",
  "category": "learning",
  "format": "Atlas lesson",
  "description": "Builds a film through separated chemical exposures and controlled surface saturation.",
  "canonicalUrl": "https://semiaifoundry.com/learn/atlas/ald-self-limiting-growth/",
  "publishedDate": null,
  "revisionDate": "2026-10-07",
  "author": null,
  "topic": "Fabrication / Repeated operations",
  "series": null,
  "license": null,
  "rightsUrl": "https://semiaifoundry.com/ai-atlas/licenses.html",
  "version": "1.3.0",
  "status": "Published educational lesson",
  "evidenceScope": "The numbers illustrate an empirical model and are not a vendor recipe. Material-specific ALD windows and selectivity must be established experimentally.",
  "contentCoverage": "published-lesson",
  "artifactUrl": "https://semiaifoundry.com/ai-atlas/lesson-data/ald-self-limiting-growth-a831d1b62669b6de.json",
  "interactiveUrl": "https://semiaifoundry.com/ai-atlas/#ald-self-limiting-growth",
  "related": [],
  "supersedes": [],
  "supersededBy": [],
  "contentHash": "8586a062fcbc8be245f21ff76e3f616a02f66af54f5f1606f65cd0904e9280cc",
  "contentLength": 5241,
  "jsonUrl": "https://semiaifoundry.com/agents/publications/atlas-lesson-ald-self-limiting-growth.json",
  "markdownUrl": "https://semiaifoundry.com/agents/publications/atlas-lesson-ald-self-limiting-growth.md",
  "sections": [
    {
      "id": "section-1",
      "title": "ALD and self-limiting surface reactions",
      "start": 50,
      "end": 409
    },
    {
      "id": "section-2",
      "title": "The mechanism",
      "start": 409,
      "end": 1574
    },
    {
      "id": "section-3",
      "title": "Science and assumptions",
      "start": 1574,
      "end": 1602
    },
    {
      "id": "section-4",
      "title": "Steady-cycle thickness estimate",
      "start": 1602,
      "end": 2385
    },
    {
      "id": "section-5",
      "title": "Engineering example",
      "start": 2385,
      "end": 2596
    },
    {
      "id": "section-6",
      "title": "Distinctions and tradeoffs",
      "start": 2596,
      "end": 2987
    },
    {
      "id": "section-7",
      "title": "Specifications and interfaces",
      "start": 2987,
      "end": 3254
    },
    {
      "id": "section-8",
      "title": "Interfaces",
      "start": 3254,
      "end": 3440
    },
    {
      "id": "section-9",
      "title": "Check your understanding",
      "start": 3440,
      "end": 3469
    },
    {
      "id": "section-10",
      "title": "Why might a deep feature need longer exposure than a flat witness wafer?",
      "start": 3469,
      "end": 3890
    },
    {
      "id": "section-11",
      "title": "Evidence and scope",
      "start": 3890,
      "end": 4238
    },
    {
      "id": "section-12",
      "title": "Sources",
      "start": 4238,
      "end": 4836
    },
    {
      "id": "section-13",
      "title": "Continue exploring",
      "start": 4836,
      "end": 4859
    },
    {
      "id": "section-14",
      "title": "Foundations",
      "start": 4859,
      "end": 4985
    },
    {
      "id": "section-15",
      "title": "Related lessons",
      "start": 4985,
      "end": 5241
    }
  ],
  "citations": [
    {
      "title": "Explore in Atlas",
      "url": "https://semiaifoundry.com/ai-atlas/#ald-self-limiting-growth"
    },
    {
      "title": "Lam Research — Our Processes",
      "url": "https://www.lamresearch.com/products/our-processes/"
    },
    {
      "title": "Applied Materials — New Ways to Shrink",
      "url": "https://ir.appliedmaterials.com/static-files/f2fbf48d-a761-4c4f-ab4c-73f312ab1ebc"
    },
    {
      "title": "MIT 6.152J — Micro/Nano Processing Technology lecture notes",
      "url": "https://ocw.mit.edu/courses/6-152j-micro-nano-processing-technology-fall-2005/pages/lecture-notes/"
    },
    {
      "title": "Published lesson data",
      "url": "https://semiaifoundry.com/ai-atlas/lesson-data/ald-self-limiting-growth-a831d1b62669b6de.json"
    },
    {
      "title": "Atlas releases and licensing",
      "url": "https://semiaifoundry.com/ai-atlas/licenses.html"
    },
    {
      "title": "CVD and PVD: two ways to supply a film",
      "url": "https://semiaifoundry.com/learn/atlas/cvd-pvd-film-transport/"
    },
    {
      "title": "Nanosheet release and replacement gates",
      "url": "https://semiaifoundry.com/learn/atlas/nanosheet-gate-last-integration/"
    },
    {
      "title": "Thermal oxidation and the silicon interface",
      "url": "https://semiaifoundry.com/learn/atlas/thermal-oxidation-interface/"
    }
  ],
  "recordHash": "734f538325574070f17f0b0224ac6c716efb0f94ea092cf22a327d05c38561d9",
  "contentFormat": "text/markdown",
  "content": "Fabrication / Repeated operations · Atlas v1.3.0\n\n# ALD and self-limiting surface reactions\n\nBuilds a film through separated chemical exposures and controlled surface saturation.\n\n[Explore in Atlas](https://semiaifoundry.com/ai-atlas/#ald-self-limiting-growth)Nanometer films on a wafer; thickness exaggerated\n\nLearning objectiveExplain saturation, separated exposures and the limits of cycle-count control.\n\n## The mechanism\n\nAtomic layer deposition separates precursor reactions in time or space so that surface reactions can saturate. A precursor reacts with available surface sites; excess material and by-products are removed; another exposure completes the reaction cycle. Repetition builds thickness with fine control. The name does not promise one complete atomic plane per cycle: growth depends on chemistry, nucleation and operating conditions. Deep or crowded features still need adequate reactant transport and removal. ALD is valuable where a thin dielectric or liner must follow three-dimensional geometry, but surface selectivity, purity and throughput must be evaluated alongside conformality.\n\n1.  Expose the prepared surface to a precursor that reacts with available sites.\n2.  Allow sufficient access into the intended feature so saturation is not restricted to its entrance.\n3.  Remove unreacted species and products before an incompatible second exposure.\n4.  Complete the complementary surface reaction and repeat the separated cycle.\n5.  Measure nucleation, thickness and composition to determine whether the assumed growth regime actually occurred.\n\n## Science and assumptions\n\n### Steady-cycle thickness estimate\n\n$$\nt\\approx g(N-N_0)\n$$\n\nSteady-regime thickness is approximately growth per cycle times applied cycles minus the effective nucleation-delay count.\n\nUse only in the calibrated growth regime with N ≥ N₀; the expression is not a negative-thickness prediction before nucleation.\n\nSymbols and units\n\nt\n\nFilm thickness in the established growth regime\n\nnm\n\ng\n\nMeasured steady growth per cycle\n\nnm/cycle\n\nN\n\nApplied cycle count\n\ncycles\n\nN₀\n\nEffective nucleation-delay cycle count\n\ncycles\n\nt is thickness in nm, g measured growth per cycle in nm/cycle, N cycle count and N₀ an effective nucleation-delay count.\n\nAssumptions An empirical estimate in a stable growth regime. It cannot be extrapolated through changing chemistry or incomplete saturation.\n\n## Engineering example\n\nSynthetic example: g = 0.08 nm/cycle over 100 steady cycles predicts 8 nm. If early nucleation delays growth by 10 equivalent cycles, the same cycle count instead predicts about 7.2 nm.\n\n## Distinctions and tradeoffs\n\nALD is not automatically one monolayer per cycle and does not eliminate transport limitations.\n\nLonger exposures and purges can improve saturation in difficult features while reducing tool throughput.\n\nGate-all-around structures need functional films around channels; high-aspect-ratio memory and interconnect features also make surface access consequential.\n\n## Specifications and interfaces\n\nControl variable\n\nNumber of completed cycles\n\nGrowth per cycle must be measured for the actual material and regime.\n\nFilm output\n\nThickness and conformality\n\nNucleation delay may make early-cycle behavior differ from steady growth.\n\n### Interfaces\n\nPrepared surface and precursors Input\n\nReactive sites and separated exposures\n\nConformal thin film Output\n\nAccumulated growth with controlled composition and interfaces\n\n## Check your understanding\n\n### Why might a deep feature need longer exposure than a flat witness wafer?\n\n1.  Cycle count alone fixes every local thickness\n2.  Reactants must reach and saturate its internal surfaces\n3.  Deep features contain no surface sites\n\nAnswer and reasoning\n\nReactants must reach and saturate its internal surfaces\n\nA saturated open surface does not establish sufficient dose and transport at the bottom of a narrow feature.\n\n## Evidence and scope\n\nThe numbers illustrate an empirical model and are not a vendor recipe. Material-specific ALD windows and selectivity must be established experimentally.\n\nUse the manufacturing investigation to trace compatible inputs, assembly and operating constraints; no current standalone calculator models this lesson’s full mechanism.\n\n## Sources\n\n-   [Lam Research — Our Processes](https://www.lamresearch.com/products/our-processes/)\n-   [Applied Materials — New Ways to Shrink](https://ir.appliedmaterials.com/static-files/f2fbf48d-a761-4c4f-ab4c-73f312ab1ebc)\n-   [MIT 6.152J — Micro/Nano Processing Technology lecture notes](https://ocw.mit.edu/courses/6-152j-micro-nano-processing-technology-fall-2005/pages/lecture-notes/)\n\n[Published lesson data](https://semiaifoundry.com/ai-atlas/lesson-data/ald-self-limiting-growth-a831d1b62669b6de.json) · [Atlas releases and licensing](https://semiaifoundry.com/ai-atlas/licenses.html)\n\n## Continue exploring\n\n### Foundations\n\n-   [CVD and PVD: two ways to supply a film](https://semiaifoundry.com/learn/atlas/cvd-pvd-film-transport/)\n\n### Related lessons\n\n-   [Nanosheet release and replacement gates](https://semiaifoundry.com/learn/atlas/nanosheet-gate-last-integration/)\n-   [Thermal oxidation and the silicon interface](https://semiaifoundry.com/learn/atlas/thermal-oxidation-interface/)"
}